Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
3m dust mask lowes
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
TypeEarloop 7. Leadtime100K Per day 8. Storage conditionTemperature from 20ºC to 38ºC Disposable ,Medical, Face Mask KN95 Certified Respirator ,Protective, Face Mask GB2626 2006 . GB2626 2006 ,Executive Standard,; Each Mask is ,marked, as shown in photos; Photos #3 is of actual product ; Master ,Box, is 50 masks, inner bags are packaged in 5.
EN 13594:2002 is a ,standard, which includes tests from both EN 388 and EN 420, in addition to other specialist requirements (specifically impact, abrasion resistance and seam strength), developed originally for the assessment of motorcyclists ,clothing,. ,Protection, against chainsaws
For orders from the Belgium government, we only use 80cm melt blown fabric material from Germany. After inspection, the BFE > 99%. The second detection method is three-layer mask ,protection,, Non woven fabric, Melt blown fabric, Non- The woven fabric ,does, not exceed 0.27g, which the normal ,standard, is 0.25g-0.27g.
Personal ,Protective, Equipment for use in Healthcare This policy identifies the appropri ate personal ,protective, equipment for staff to use at the ,required, times and for the defined care delivery procedures and processes. This document forms part of the mandatory requirements as identified within the Health and Social Care Act 2008 (revised 2015).
sting of the product is ,required,, it is done by a certified institute and the product is ,marked, with the four-digit identification number of the institute: PSA I 1234 PSA III 1234 PSA II Additionally ,protective clothing, and gloves are ,marked, with the following pictograms, according to each norm: General requirements for gloves (according to EN 420)
However, the current domestic GB19083-2010 “Technical Requirements for ,Medical Protective, Masks” ,does, not make requirements on whether ,medical protective, masks can be reused and wearing time. WS / T311-2009 “Hospital Isolation Technical Specifications” proposes “The effectiveness of ,medical protective, masks Continue to apply for 6 to 8 hours.
EN ISO 13688:2013 ,Protective clothing, - General requirements EN ISO 10993-1:2009 Biological evaluation of ,medical, devices - Part 1: Evaluation and testing within a risk management process Many products ,require, CE marking before they can be sold in the EU .
2. In the process of Incoming raw material quality control, we ,need, to meet or exceed the following standards. 2.1. Second Layer Melt Blown BFE Test (Bacterial, Filtration, Efficiency) Type I >95% Type II, Type IIR> 98%. 2.2. Weight test, the weight test of each layer of ,protection, reaches the ,standard, …
CE ,marked, masks are disposable masks approved by the European Economic Area for safety, health and environmental ,protection, standards. The EUROLAB Laboratory ranks respirators as N95, N99 or N100 according to the degree of efficiency, for the TÜRCERT CE label, the masks are FFP1, FFP2 or FFP3.